DEVELOPMENTAL HISTORY
The initial development of IAUS' solar technology began only about eight years ago. We are unaware of any solar technology that has been produced in such a short amount of time. Solar companies have been known to take between 20-30 years and longer to develop their products notwithstanding having hundreds of millions of dollars to spend on R&D. In spite of having limited funds and being understaffed--and having spent as little as 2% of what some solar R&D companies have expended--IAUS has produced a unique technology with key advantages over other renewable energy products and has done so at a faster pace than most. Below is just a small sample of the many IAUS solar energy system and component drawings. While IAUS is fabricating the last of a few minor retrofits and changes to the system, virtually every part right down to the nuts and bolts has been accounted for. The cost of manufacturing thus far has come within the price range we had hoped. We believe our product will become the lowest cost solar ever developed with unmatched versatility in hybrid power generation, 24/7 energy storage, co-generation and desalinization capabilities. | |
| Unlike other solar technologies that are made from expensive mirrors, glass and exotic metals, IAUS' technology is ingeniously made from two of the least expensive and most abundant materials available: Plastic & Steel. |  Click to Enlarge |
| Producing this product from A to Z has been no small task. In fact it has been nothing short of monumental. There have been inventions within inventions—the development of devices, components and processes that,, either in part or as a whole, have never been done before. The proprietary hydraulic pivot shown in the two video clips below are perfect examples. These are no easy feats. | |
| The Dual-Axis Hydraulic Pivot System | |
| is a short animated feature of the preliminary design prior to the actual fabrication of the components. The video starts out with a top down view and finishes with a view from the side. | shows a test run of the actual manufactured and installed drive. Some adjustments were made from the original design during fabrication and installation such as lengthening the ram drives and reducing the number of rings and hydraulic rams by nearly half. http://www.rapower3.com/ |
No comments:
Post a Comment